Imagine the Universe!
Imagine Home | Science | Advanced Science | 

X-ray Detectors

So...what would a perfect X-ray detector be like?

Advanced HEA icon
What would be the ideal detector for satellite-borne X-ray astronomy? It would possess high spatial resolution with a large useful area, excellent temporal resolution with the ability to handle large count rates, good energy resolution with unit quantum efficiency over a large bandwidth. Its output would be stable on timescales of years and its internal background of spurious signals would be negligibly low. It would be immune to damage by the in-orbit radiation environment and would require no consumables. It would be simple, rugged, and cheap to construct, light in weight and have a minimal power consumption. It would have no moving parts and a low output data rate. Such a detector does not exist.

- taken from X-ray Detectors in Astronomy by G. W. Fraser.

Introduction to X-ray Detectors

The quest of X-ray astronomy is to be able to detect a weak source against a fairly strong background. Principally because of the relative weakness of the sources, integrating detectors (such as film) have not found a place in cosmic X-ray astronomy. Source detection is done on a photon-by-photon basis. A flux of one photon per square centimeter per second (in the 1-10 keV range) observed at Earth constitutes a bright cosmic X-ray source!

X-rays, just like any other kind of light, can be thought of as either electromagnetic waves or as massless particles. Both ways are right -- this is known as duality. The way we use to think about X-rays in a given context is the way that makes the problem the easiest. Thus, when we talk about optics or dispersive spectrometers we will talk about waves, because in these cases we need so see how the waves will interact with surfaces and interfaces, and how they will combine and interfere with each other. When we speak of non-dispersive spectrometers, however, it makes sense to talk about particles of light, called photons.

So how do we measure the energy of an X-ray photon? We need the X-ray to give all its energy to some kind of detector. That energy will change something in the detector and, by measuring that change, we can determine the energy of the incident X-ray. X-rays interact strongly with electrons. You may know that lead is good at blocking X-rays. Well, that's because each lead atom has 82 electrons and lead is a metal, so the atoms are packed together pretty close. Lead stops X-rays because it has a large electron density.

An X-ray can give all of its energy to an electron (a process called photo-electric absorption), or it can give some of its energy (a process called Compton scattering), or it can scatter without losing any energy (a process called Rayleigh scattering). The probability associated with each of these kinds of scattering depends on the energy of the X-ray photon, the bound state the electron is in, and the scattering angle. For the X-ray energies of most interest to X-ray astronomy, photo-electric absorption is much more likely than either kind of scattering.

So, when an X-ray stops in a detector, it has given all of its energy to one electron. That electron can rattle around in the detector and give energy to other electrons. In some materials, these electrons will have enough energy to be free of their host atoms. If an electric field is applied, these electrons can be collected and counted. The number of electrons collected tells you the energy that was deposited. Such detectors are called ionization detectors.

Another approach is to measure heat. All those excited electrons would rather go back to their original energy. They want to return to what is called the ground state. Through scattering with other electrons or with vibrations in the solid itself, they can lose that extra energy. But that energy has to go somewhere. What is does is heat the solid and increase its temperature. If you measure the change in temperature, you can measure how much energy the X-ray originally had.

No matter which observational technique is used to view the X-ray sky, the final outcome of a measurement is determined by the properties of the electronic detector with which the collimated, focused, or diffracted X-ray photons eventually interact. There are several classes of these detectors, each with their strengths and weaknesses. They include:

Imagine the Universe is a service of the High Energy Astrophysics Science Archive Research Center (HEASARC), Dr. Alan Smale (Director), within the Astrophysics Science Division (ASD) at NASA's Goddard Space Flight Center.

The Imagine Team
Acting Project Leader: Dr. Barbara Mattson
All material on this site has been created and updated between 1997-2012.

DVD Table of Contents
Educator's Index